Roland GX-24 User Manual

3-2 If You're Using a Windows
Chapter 3: Installing/Uninstalling Software
31
➎
Close the [Device Manager] and click [OK].
➏
Detach the USB cable connected to the computer.
➐
Restart Windows, then uninstall the driver.
☞ p 32 "Uninstalling the Driver"
➑
Redo the installation from the beginning.
☞ p 28 "Installing the Driver"
Windows 98 SE/Me
➊
Refer to "Uninstalling the Driver" on the following page and uninstall the driver.
☞ p 32 "Uninstalling the Driver"
➋
Redo the installation from the beginning.
☞ p 28 "Installing the Driver"

Roland GX-24 Specifications

General

Cutting Speed	Up to 20 inches/sec (500 mm/sec)
Distance Accuracy	±0.004 inches (±0.1 mm) or less
Repeatability	±0.1 mm (0.0004 in.) or less
Interface	USB
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	5 to 40°C (41 to 104°F)
Operating Humidity	35 to 80% RH (non-condensing)
Software Resolution	0.025 mm/step (0.001 in./step)