To Next Page
J
John GilbertAug 23, 2025
Why is there no sound coming from my Roland JUNO-Gi Synthesizer?
- DDominic HamiltonAug 23, 2025
There are several reasons why you might not be getting any sound from your Roland Synthesizer. Here are a few things to check: * Ensure that your connected amp or speakers are powered on. * Verify that the volume on any connected devices is appropriately adjusted. * Make sure the [VOLUME] knob on the synthesizer itself isn't set to the minimum level; adjust it as needed. * Confirm that your amp, speakers, or headphones are correctly connected. If you can hear sound through headphones but not your speakers, there may be an issue with your connection cables or your amp/mixer. * Ensure you are using a connection cable that does not contain a resistor.
General
