13
If you’ve done either of these things, you can reload “Gonna Want It”
as described on Page 15 of this booklet. Once you’ve done that, return
here.
1 Bring the DIGITAL RECORDER area’s MASTER fader three-quarters of
the way up, and then press the PLAY button.
2 PLAY turns green, and after a few seconds of silence at the top,
“Gonna Want It” plays.
You can stop “Gonna Want It” at any time by pressing the STOP
button, or return to the beginning by pressing 9.
The RECORDER Screen
When you’re using the JUNO-Gi as a synth, your base of operations is the Live
Set Play screen. However, the digital recorder has its own “home” screen: the
RECORDER screen.
To display the RECORDER screen:
1 Press the RECORDER VIEW button.
Repeated presses of the RECORDER VIEW button toggle the JUNO-Gi’s
display between the RECORDER screen and the Live Set Play screen.
You don’t have to switch to the RECORDER VIEW screen to use the
digital recorder—it’s just nice to see what’s going on there.
Listening to the Main JUNO-Gi Demo
As shipped from the factory, the JUNO-Gi is set up to play “Gonna Want It”
stored on the SD card that came installed in your JUNO-Gi.
If you’ve replaced the JUNO-Gi’s original SD card, please swap back to
it since we’ll be working with the factory demos in this section.
If you haven’t recorded any of your own songs yet or loaded another demo,
“Gonna Want It” is ready and waiting to be played.
To Next Page
Loading...
