Roland JV-30 - Reverb Type

Setting Performance Functions Applying to All Parts
O
Chorus
Chorus Leyel
30
Chorus Type
Short Delay
Provides selection of
the
Chorus Level and
the Type for it.
The acceptable
range for the Level is
0-127.
The
foilov>/ing 8 Types are available:
Tvpe Effect
Chorus 1/2/3/4
Standard chorus effect.
Feedback Chorus Chorus
effect that
simulates a flanger with soft sound.
Flanger
An effect that is sometimes used to simulate the takeoff and
landing of a jet.
Short Delay A
delay repeated in
a short
time.
Short Delay (FB)
A short delay repeated many times.
O
Reverb
Reverb
Li^-'-'el
38
Reverb
Type
Plate
Provides selection of the Reverb Level and the Type for
it.
The acceptable
range for the Level is
0-127.
The
following
8
Types are available:
Type
Effect
Room
1/2/3
Reverb that simulates the natural echo
of
a
room. Sharply
-
defined reverb v/ith a broad spread.
Hall
1/2
Reverb that simulates the natural echo of a
hall.
Smooth
reverb,
with greater depth than room.
Plate
This effect simulates Plate
Echo
Ca
type of reverb that uses
the
vibration of metal plates to produce a metallic echo).
Delay
Standard delay effect.
Panning
Delay
Delay repetitions pan to left and right. This effect can be used
if the unit is connected to a stereo
audio device. It is effective
when the JV-30 is connected to a
stereo system.
0MIDI
These
settings are for functions
which come into play
when
you
connect
this instru-
ment with
another MIDI-equipped unit.
For details, refer to
"MIDI Settings" (» p.34).
81