Roland JV-30 - Altering the Settings]

Editing
Tones
The
JV-30
allows
you
to make changes in
the settings for a
Tone, then store it
as an
original Tone.
Such edited Tones are stored
in memory as
User Tones.
*
Any changes
made in the settings
for
a
Tone will only be temporary.
Once anotiier
Tone is selected, the
settings wilt revert to
their original values. Should you wish to
retain ^e
setting changes you have made,
they need to be stored in memory by
performing
the
Write
Procedure.
*
The procedures
explained here will not work for
Drum Sets. To change the settings
for Drum
Sets, refer to "Editing Drum
Sets"
(» p.26).
[Altering the
Settings]
Tones are edited by making changes
in the settings for their 8 parameters (editable items).
These parameters belong to
one of three groups: Vibrato, Filter, or
Envelope, depending on
their purpose.
M.TE DEPTH OetAV
-
CUTOFF Fftta RfSO
-
ATT«K
DECAY ftElEASE
®
o
^6
(T) Select the Tone
which you
wish
to edit.
Both User and Preset Tones can be selected.
(2)
Using buttons
(a),
select the parameter group.
The indicator on the button which
has been pressed will light.
©
Using sliders
(g),
alter the value for the parameter.
Depending on
the
group
selected, the parameters which can
be
edited with each of the sliders will change.
Once the value for
a
parameter has been changed,
the
indicator
on
either [PRESET] or [USER] will start blinking. This indicates
that
a
change in value has been made.
To return to the stage
you
were originally in, press whichever
button
in
@
that
is
lit.
*
Changes in Tone values can
also be made using PARAMETER
[Al [],
the VALUE slider, or VALUE
[A] [T].
Use PARAMETER
[A] []
to select the parameter, then alter the
value using the VALUE slider or VALUE
[)
(].
[Parameters and Their Functions]
O
Vibrato
#
Vibrato Rate
1 •Piano 1
Uib,
Rates +38
Vibrato Depth
Vibrato
Delay
l^Piano 1
Uib,
Depths +30
IKPiano 1
Uib.
Delays
-4-20
The following settings affect the manner in which Vibrato is applied.
Adjusts the speed of the vibrato.
Range:
-50
to +50.
The higher the value, the faster the
vibrato becomes.
Adjusts the depth of the vibrato. The higher the value,
the deeper the
vibrato
becomes.
Range :
-
50 to + 50. The higher the slider Is raised,
the deeper the vibrato becomes.
Provides an adjustment for the amount of time that is
to pass
between the moment
a key is
pressed,
and the moment that
Vibrato
begins to take effect.
Range:
-50
to
+50. The higher
the value,
the longer
the time becomes.
84