Roland JV-30 - Program Numbers

JV-30 Program
Numbers
On the JV-30, Program Change data
can
be used
to change its internal Tones,
or to change Tones in an external device by means of panel operations. The
Program
Change
data that
accomplishes these tasks is communicated over the
Transmit/Receive
channels.
1
ln3un
bhot
P:
16-3
1
iP-Sun
bhot.
Ps
123
On the JV-30, a
Program Change Number
is allocated for each Tone.
Should
you
wish to de-
termine the Program
Number of the currently selected
Tone, press either PARAMETER [Aj
or
IT]
while the name of the
Tone appears in the
display. You can also
switch between display
of the Bank/Number
and the Program
Number.
• Transmitted Program
Number when
the JV-30's Bank/
Number buttons
you press
^^Number
1 2 3
4
5 6
7 8
1 1 2 3
4
5 6
7 8
2 9
10 11 12 13
14 15 16
3
17 18 19 20 21 22
23 24
4
25
26 27 28 29 30
31 32
5
33
34
35 36
37 38 39
40
6
41 42
43 44 45 46 47 48
7 49 50
51 52
53
54 55 56
8
57
58 59 60
61 62 63
64
9 65
66
67
68 69
70 71
72
10
73 74 75 76 77
78 79
80
11 81 82 83
84
85
86 87 88
12 89 90
91
92 93
94 95 96
13 97 98 99
100 101 102 103
104
14 105 106
107
108
109 110 111 112
15 113 114 115
116 117 118 119 120
16 121 122 123
124 125 126 127 128
When selecting the Drum Part
Number Program
Number
1 1
2 9
3
17
4 25
5
26
6 33
7 41
8
49
VARIATION 57
•
1
MT-32 Set 128
V\/hether using an external
device to
change this
unit's Tones, or
changing Tones
in an
external
device from
the JV-30, you
should
carefully study the
Program
Number
Correspondence
chart
for the
external device.
49