MIDI
Controller Features
The
JV-30 allows you to add further expression to songs while they are played
by, or recorded onto a sequencer. This can be
accomplished
thanks to the MIDI
Controller Features, which allow
you to use
the sliders for
control over what-
ever parameters
you
wish. For example,
you
can apply continuing
changes in
the volume of Parts to add excitement, pan the sound left and right, or make
many other creative alterations in parameter values.
The sliders thus make
easy the recording
of
many operations which
would take much longer using
conventional methods of entry into a sequencer.
Perform
the following to use the MIDI Controller features creatively in songs.
[Procedure]
®
b
Press simultaneously
Press simultaneously
(T) Using PART
[-^1
[],
select the Part for which
you wish to change
the volume
(expression) or panning.
(D
Press IMIDI] and [CONTROL]
simultaneously.
(3)
Have the
sequencer ready to record,
then move the sliders
to change the volume,
or pan the
sound while recording.
®
To return to where
you were originally,
once again press IMIDI]
and ICONTROL]
simultaneously.
Parameters
are assigned to the three
sliders as shown below. The Control
Number determines
what is
to be assigned, and is
set
using
VALUE
[A] [].
For
details, refer to the "MIDI
Implementation."
i
i
i
ExpressiorTl
I
Pan
I
I
Control Number
^-^4
Exp- Pan
Ci::=07
100
20 28
t
.These numbers
change as you
move the slider
The range
for each parameter
is as shown below:
Expression 0-127
Pan
0-127
(L63~R63)
Value for the indicated
Control Number
0-127
The Control Numbers
which can be
specified
are: 0-9, 12-31,
and
64-95.
To Next Page
Loading...
