Roland M-16E - Setup with Monitor and Cue

3. Setup with a Monitor and Cue
Nf Ln. |]
( Master Section )
Power Amplifiar
‘SRA- 1200
SRA-2400
SRA-4800 atc.
BHow to Monitor or Fold back
QAdjust the output level of the sound to be monitor-
ed with the Monitor Volume Control of each
channel.
@iAdjust the overall volume of the Master section
with the Monitor Send Volume Control.
*The mixing balance or volume for monitoring can be
set regardless of the position of the Channel or
Master Faders.
* The AUX Socket also can be used for monitoring by
setting the AUX Seiect Switch to the PRE position.
16
Speeker
DA-B00 1500
SRS-B0.120 etc,
HHow to Monitor through the Speakers
or Headphones with the Cue
@Press down the Cue Switch which you wish to
monitor.
@Adjust the overall output level with the Head-
phones/Cue Volume Control.
Cue signal can be monitored through the Head-
phones or Cue Send Sockets.
* When the Cue Switch is not used, the signa! from the
Master Out is output.