Roland MKS-20 - Tone Color

(3)
Push
the
Edit button
®.
Push the Edit
Button,
and the
Edit
Indicator
lights
up
showing
the
MKS-20
is in
the Eidt
mode.
The Edit Indicator
lights
up.
Any
nunnber of 1 to 16 is valid for
receive MIDI
channel.
When it is
set to channel
1,
OMNI ON or
OFF
can
be selected.
When OMNI
ON
is
selected,
the
Display
will
respond with:
While
MIDI signal is
being received, the MIDI
Message
Indicator is lighted.
MIDI
MESSAGE
>^^>.
"/^
b.
Tone
Color
Selection
The MKS-20 retains
64 tone
colors:
8 basic
voices
and other
7 variations for
each voice.
There
are
two
methods for calling
a tone color;
by using
the
Voice
Selector
Buttons
1 to 8 and
the Bank
Button,
or
by sending the MIDI program
change
message
from
the external
device.
en
2
3
CD
4
5
en
6
CD
7 3
BANK
4
Voice
Selector
Buttons
Bank
Button
8 different tone colors
are preprogrammed in
the
voices 1
to 8
of
Bank 1
as
shown below.
Each tone
color has another
7 variations (Bank
2 to
8).
That
is,
there are
altogether
8
variations for one
tone color.
VOICE 1
VOICE
2
VOICE
3
VOICE
4
VOICE
5
VOICE 6
VOICE 7
VOICE
8
PIANO
1
PIANO
2
PIANO
3
HARPSICHORD
CLAVI
VIBRAPHONE
E.
PIANO
1
E.
PIANO
2