35
Using the Convenient Functions in Performances
If you want to use the changed content as a new Setup, use the following procedure
to save the settings to a Setup.
You can store 32 Setups on the RD-300SX.
fig.02-05
1
Press [WRITE], getting the indicator to light.
The Setup screen appears.
fig.disp.S11
2
Select the save-destination Setup, either by pressing [INC] or [DEC], or TONE
SELECT buttons.
3
Press [ENTER].
fig.disp.Sur
A confirmation screen (Sure?) appears.
If you do not want to save the Setup, press [EXIT] or [WRITE].
The operation is cancelled, and you are returned to the Tone screen.
4
When [ENTER] is pressed, saving of the Setup begins.
When you have finished saving the Setup, the [WRITE] indicator goes out.
You are returned to the Tone screen.
Storing Settings to Setups ([WRITE])
3, 4
1
2 2
Settings Not Saved in a Setup
The following settings cannot be saved to a Setup.
• System settings (p. 37)
• SOUND CONTROL settings (p. 30)
• EQUALIZER Knob Position (p. 31)
• V-LINK settings (p. 51)
• Transpose (p. 25)
RD-300SX_e.book 35 ページ ２００５年４月２０日 水曜日 午後３時４０分
To Next Page
Loading...
