Feed Adjuster
Optimized for Roll Media
Allows you to adjust parallelism of the media holder,
grit rollers, and take-up unit
Reduces banding caused by gap or overlap of printing
by feeding media as straight as possible
Prevents cockling by feeding media as straight as possible
and prevents media from touching the print head
Improved take-up
The installation and adjustment of the feed adjuster
should be performed by service engineers.
1. Product Information
14/32
* For detailed instructions on how to install and adjust the feed adjuster,
refer to Set Up Guide and Service Note.
Installation
environment
Axis
parallelism
Part and installation accuracy
To Next Page
Loading...
