Roland VersaArt RE-640 - User Manual

USER'S MANUAL
Thank you very much for purchasing this product.
 To ensure correct and safe usage with a full understanding of this product's performance, please be sure to read through
this manual completely and store it in a safe location.
 Unauthorized copying or transferral, in whole or in part, of this manual is prohibited.
 The contents of this document and the specifications of this product are subject to change without notice.
 The documentation and the product have been prepared and tested as much as possible. If you find any misprint or
error, please inform us.
 Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may occur through use of
this product, regardless of any failure to perform on the part of this product.
 Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may occur with respect to
any article made using this product.

Summary

Chapter 1 Machine Highlights

To Ensure Safe Use

Essential safety warnings and symbol explanations for operating the machine.

Chapter 2 Basic Operation

Prepare the Media

Switch On!

Procedure for powering on the printer and details on the power-saving feature.

Loading Media

Instructions for loading roll media and sheet media correctly.

Setup of Media

Guides through media setting menus, temperature, head height, and correction adjustments.

Outputting

Covers setting output start location, printing tests, and starting/pausing output.

Switch Off

Chapter 3 Maintenance

Checking for Remaining Ink and Replacing Cartridges

How to check ink levels and replace ink cartridges.

Maintenance that Should Be Performed Daily

Cleaning

About Care and Maintenance of Print Head

When Normal Cleaning Is Not Effective

Maintenance that Should Be Performed More Than Once a Month

Manual Cleaning of Print Head

Detailed step-by-step guide for performing manual print head cleaning.

When Problems Such As Dot Drop-out are Not Cleared Up

Troubleshooting steps for persistent dot drop-out issues.

Replacing Consumable Parts

Chapter 6 Read this chapter whenever you face a problem. (FAQ)

Printer Does Not Start Up!

Troubleshooting steps for printer startup issues, power, and connectivity.

Attractive Printing is Impossible

Media Jam Occurs!

Media Feed is Not Smooth

Print Head Stops Moving. Why?

Steps to resolve print head movement issues and emergency measures.

A Message Appears

An Error Message Appears

Details on error messages and actions to remedy problems.

Roland VersaArt RE-640 Specifications

General

Print Resolution	1440 x 1440 dpi
Interface	USB 2.0, Ethernet
Power Requirements	100-240 V, 50/60 Hz
Print Technology	Piezo inkjet
Maximum Print Width	64 in
Ink Colors	CMYK, Light Cyan, Light Magenta
Media Types	Vinyl, banner, paper
Media Thickness	1 mm
Weight	220 kg
Operating Environment	35-80 % RH