9. Transport
31/32
Transport of the Machine
with ink filled
Do not subject the machine
to impact
Do not expose the machine
to temperatures exceeding
30ºC for a prolonged period
*2
Turn on the main power
SW within 24 hours
with ink removed
(with HEAD WASH)
with ink removed
(without HEAD WASH)
Be sure to observe the following points when transporting.
The machine can be transported in three different ways.*1
Do not subject the machine
to impact
Do not expose the machine
to temperatures exceeding
30ºC for a prolonged period
*2
Perform FILL INK within
the day
*1 For more details on how to transport the machine, refer to Service Note.
*2 During non-operation:
Keep the machine at a temperature of 15 to 30˚C and relative humidity of 20 to 80%RH (no condensation).
Do not subject the machine
to impact
Do not expose the machine
to temperatures exceeding
30ºC for a prolonged period
*2
Perform FILL INK within
three days
To Next Page
Loading...
