Roland SH-1 Instruction Manual

PRECAUTIONS
AND
CONNECTION
PRECAUTIONS
•
Avoid
using the
synthesizer in very
high or
low
temperature
locations. Also
keep it
away from heaters
and
coolers since
this type of
equipment
tends
to
affect
circuit and
pitch
stability.
•
Avoid using the
synthesizer in very
dusty or
high-humidity
places.
•
If
it is necessary to
piay
the synthesizer in
an area
with
neon
or fluorescent
lamps, keep the
synthesizer as
far away
from
these lamps as possible
since they
will induce
high levels
of noise.
Sometimes,
changing the
angle of the
synthesizer in
relation to
the lamps wiil help
reduce
noise.
•
When connecting the
synthesizer,
plug the cord
into the
external
amplifier first,
then the
other end into
the SH-1
output.
To
disconnect, remove the
cord from
the
synthesizer first,
then
from
the amplifier.
•
To clean the
synthesizer, wipe
with a
cloth
dampened
with
a
neutral cleanser.
Do not use
solvents
such as paint
thinner.
COMBINING WITH
ELECTRONIC ORGAN
CONNECTING TO AMP
giiiniii
ijjin
i
*Tune to
unison with middle
C
i
on the
organ.
When
playing an
electronic
organ in
combination
with
the
SH-1,
set the
units as
illustrated
above.
Connecting the
SH-1
to
an
amplifier.

Roland SH-1 Specifications

General

Brand	Roland
Model	SH-1
Category	Synthesizer
Language	English