Roland SP-555

40
Connecting the SP-555 to your computer
The SP-555 provides USB audio/MIDI interface
functionality.
If you install a dedicated driver in your computer and use a
USB cable (sold separately) to connect the SP-555 to your
computer, you'll be able to output sound from your computer
via the SP-555. By using the included SONAR LE software,
you can use your computer to record sound from a guitar or
mic connected to the SP-555.
You can also use SP-555 Wave Converter to convert WAV/
AIFF format files that you created on your computer into SP-
555 samples, or to convert SP-555 samples to WAV/AIFF
format files.
You must install the driver before you connect the SP-555 to
your computer.
* In order to install the driver and the software, you’ll need to log
on as a user who has administrative privileges.
Installing the driver
1.
Start up your computer with all USB cables
disconnected (except for a USB keyboard and/or
mouse, if used).
2.
Navigate to the SP-555 UTILITY CD-ROM “Driver”
folder ➜ “XP” folder, and double-click Setup.exe.
3.
When the display indicates “Roland SP-555 Driver will
be installed on your computer....” click [Next].
4.
Follow the on-screen directions to proceed with the
driver installation.
* The SP-555 UTILITY CD-ROM Driver folder
➜
XP folder
contains a Readme file that describes how to install the driver,
and provides troubleshooting information. Be sure to read this
before you use the system.
Installing SP-555 Wave Converter
1.
Navigate to the SP-555 UTILITY CD-ROM “Wave
Converter” folder, and double-click Setup.exe.
2.
The “Welcome” screen will appear. Click [Next].
3.
Follow the on-screen directions to proceed with
installing SP-555 Wave Converter.
Installing SONAR LE
1.
Place the installation CD-ROM into your computer’s
CD-ROM drive.
* If the auto-play dialog box appears, choose “Run Setup.exe”
and proceed to step 4.
2.
From the Windows Start menu, choose “My
Computer.”
3.
The drives detected by your computer will appear;
double-click the CD-ROM drive.
4.
The installer will start up. Proceed with the installation
as directed by the on-screen instructions.
* If SONAR LE automatically starts up after installation is
completed, refer to “Starting SONAR LE and making
settings” (p. 43).
Installing the driver and software
Windows XP users
SP-555_e.book 40 ページ ２００７年６月２５日 月曜日 午前９時９分