Roland TD-6V - Setup Utility, Trigger Basic, and Trigger Advanced Parameters

132
Parameter List
SONG/COPY
+: This setting cannot be made in GM mode.
SONG/DELETE
+: This setting cannot be made in GM mode.
SONG/ERASE
+: This setting cannot be made in GM mode.
Setup Parameters
SETUP/UTILITY
+: This setting cannot be made in GM mode.
SETUP/TRIG BASIC
SETUP/TRIG ADVNCD
Parameter
Value
Src (p. 89)
Copy Source 001–270 +
Dst (p. 89) Copy Destination 171–270 +
Parameter
Value
Song (p. 90)
Delete Song 171–270 +
Parameter
Value
Song (p. 91)
Erase Song 171–270 +
Part (p. 91) Erase Part ALL, KIT, PERC, PART1, PART2, PART3, PART4 +
Parameter
Value
LCD Contrast (p. 76)
LCD Contrast 1–16
PercPrtLevel (p. 76) Percussion Part Level 0–127 +
Backing Level (p. 77) Backing Level 0–127 +
Mute (p. 77) Mute SongDrum, SongDrm/Prc, UserDrmPart, Part1, Part2,
Part3, Part4, Part1-4
+
Master Tune (p. 77) Master Tune 415.3–466.2 (0.1 Hz steps)
Preview Velo (p. 78) Preview Velocity 0–127
AvailMemory (p. 78) Available Memory 0–100% (check only)
Parameter
Value
TrigTyp (p. 69)
Trigger Type PD-8, PD Type, PD-80R, PD-120, PD-125, KD-8, KD Type,
CY-8, CY Type, RT-7K, RT-5S, RT-3T, RIM
Secsitivity (p. 71) Sensitivity 1–16
Threshold (p. 72) Threshold 0–15
TrigCurve (p. 72) Trigger Curve LINEAR, EXP1, EXP2, LOG1, LOG2, SPLINE, LOUD1,
LOUD2
Xtalk Cancel (p. 73) Crosstalk Cancel OFF, 20–80 (5 steps)
Parameter
Value
Scan Time (p. 74)
Scan Time 0–4.0ms (0.1 ms steps)
Retrig Cancel (p. 74) Retrigger Cancel 1–16
Mask Time (p. 74) Mask Time 0–64ms (4ms steps)
Rim Sens (p. 75) Rim Sensitivity OFF, 1–15
TD-6KV_e.book 132 ページ ２００５年１月２４日 月曜日 午後７時４分