Roland TD-6V - Connecting Headphones and Audio Gear

22
Making the Settings
Connecting Headphones, Audio
Equipment, Amps, and Other Gear
fig.P-010
1
Turn off the power of all devices before you make connections.
921
To prevent malfunction and/or damage to speakers or other devices, always
turn down the volume, and turn off the power on all devices before making
any connections.
2
Connect the supplied AC adaptor to the AC adaptor jack.
3
Connect the OUTPUT L(MONO) and R jacks on the rear panel to your
audio system or amp. If using headphones, connect them to the
PHONES jack.
4
Plug the AC adaptor plug into a power outlet.
L
R
Stereo miniature phone type
CD/MD deck, cassette player, etc.
To prevent the inadvertent
disruption of power to
your unit (should the plug
b
e pulled out accidentally),
and to avoid applying
undue stress to the AC
adaptor jack, anchor the
power cord using the cord
hook, as shown in the
illustration.
Using the TD-6V’s MIX IN
J
ack, allows you to play
along with a CD or other
such sound input (p. 51).
TD-6KV_e.book 22 ページ ２００５年１月２４日 月曜日 午後７時４分