Roland TD-6V - Restoring Factory Settings

25
Setup Guide
Restoring the Factory Settings (Factory Reset)
This restores the pad and instrument settings, song data, and other
information stored in the TD-6V to the original factory settings.
fig.P-003
1
While holding down [SHIFT], press [EDIT (SETUP)].
[EDIT (SETUP)] lights.
fig.P-004ai
2
Press [ ] to select “FactoryReset.”
fig.P-005_50
3
Press [ENTER ].
The Factory Reset screen appears.
fig.P-006_50
All data and settings
stored in the TD-6V are
lost in carrying out this
operation. Use the “Bulk
Dump” operation to save
crucial data and settings to
an external MIDI device
(SETUP/BULK DUMP/
Bulk Dump; p. 103).
For more information
about data compatibility
b
etween the TD-6 and the
TD-6V, refer to p. 103.
21
4 3, 5, 6
When [SHIFT] and
[EDIT (SETUP)] are held
down when the power is
turned on, the display
j
umps to the Factory Reset
screen. When carrying out
Factory Reset, read from
Step 4.
TD-6KV_e.book 25 ページ ２００５年１月２４日 月曜日 午後７時４分