Roland TR-626 - Page 50

Applications
Step 6
Step 7
e Stetting Flam Intervals
Step 1
While holding
50
While holding the Shif Key down, push the Main Key ( 1 to 16) that
corresponds to the step where the flam is to be written.
The dots ( •) on the steps to which you program the flam effect
will flash.
Do this again for every other step that you would like to add the
flam effect.
To write flams in other drum voices, repeat steps 4 to 6.
Flam intervals can be set at one of five positions, from O to 4, for
each pattern.
i j
'----"
r------,
Flam interval
While pressing the Shift Key, push the Shuffle/Flam Key twice, so
that FLAM appears in the Display, Each time the Shuffle/Flam Key
is pressed the TR- 626 alternates between SHUFFLE and FLAM in
the Display.
Roland
RHYTHl'v1 CCJIV!i='CJSER TR-626
D
M#i!iiiW
DOWN
down, push D twice
..
Currently set values appear in the Display.
-,
C
FLAM