Roland TR-626 - C.loading

Storing Rhythm Patterns in External Mem
c. Loading
Step 1
Step 2
Step 3
Step 4
74
Make the same connections that are required for verifying.
Find the position on the tape to start from by listening to the
"constant" sound in the same way as it was done for verifying.
Start playing the tape.
While pressing the Shift Key, push the Tape Key (Main Key 16),
then push Main Key 3, check that "L" appears in the Display, and
lastly push the Enter Key. Do this after the constant sound begins.
D
M#i#lliM
D
0
ll!l-
I
D
L
.. _
,
ACCENT
D
CNlf:H
When the TR -626 is loading from the tape, the Tempo Indicator will
light.
When the data has been loaded correctly, the TR-626 will go into
track play mode.
* If you would like to suspend loading, push Main Key 1.
* Please try to always save and load as much as possible using the
same tape recorder.