Roland TR-626 - Tape Memory; A.saving

Storing Rhythm Patterns in External Mem
2. Tape memory
a. Saving
Step
Step 2
70
Data stored in the TR-626, that 1s in Bank 1, can be stored
collectively on an audio tape.
Putting data from the TR-626 onto a tape is called "saving": calling
data from a tape to the TR -626 is called "loading" : and checking
if data has been correctly saved is called "verifying."
* Do this while the TR-626 is in track play mode in Bank 1 and is
stopped.
*It should not be done in Banks 2 or 3.
Connect a tape recorder's microphone jack to the TR-626's Tape In
/ Out Jack found at the back of the TR - 626, as shown in the figure.
Tape IN/OUT jack
MIC jack
TR-626
Start recording with the tape recorder.