Roland TR-626 - Playing Factory Presets

Basic Operation
b. Playing the Factory Presets
The TR-626 has some preset data in its memory. It can be
reproduced by carrying out the following procedure :
Check to see if the TR - 626 is in TRACK PLAY mode and on Track
1.
,,,--- ... ,
BANK TRACK
MEASURE PATTERN I MODE \
'
I C
' ' I I TRACK PLAY)
, , \ _____ /
If any other mode is shown, set the TR -626 to TRACK PLAY mode
by pushing the Mode Key until it is. If Track 1 is not displayed,
switch the machine to Track I by pressing the Track Number Key
1 (4)
Roland
_.,THM COVF'CJSEFI Trl-626
Mode key
Track number key 1 (4)
Push the Start/Stop Key to begin playing. Pushing it again will stop
the machine.
Roland
nHYTHM r:cMi"CISER Trl-626
Start/Stop key
13