13
Shaping a Layered or Split Sound
1 Highlight the sound you want to modify on the display and use
the sliders to make the changes you want.
By moving from one to the other layered or split sound on the
display, you can use the sliders for realtime control of either sound.
Saving Your Layers and Splits
You can store any layer or split as a registration, as described on page
15 of the Owner’s Manual. (For much more on registrations, see the
VR-09 Workshop booklet Using Registrations.)
Leaving Dual or Split Mode
The simplest way to return to normal operating mode is to simply go to
the desired mode by pressing its MODE button.
The Factory Registrations
So far, we’ve had occasion to mention the usefulness of registrations
a few times. You can save your own registrations in any of the 100
registration memory locations. When the VR-09 ships, the first
32 registrations contain factory-programmed registrations. You can
replace any of these with your own, of course, but here’s a list of the
registrations that come in your VR-09.
Bank and Number Registration Name Type
1-1 LongDivision Brass
1-2 80sPwrLuvP
Piano
1-3 Bay Area B3 Organ
1-4 DirtSawLd Syn Lead
2-1 TheWrldIsUrs Brass
2-2 Sweet Dream Brass
Bank and Number Registration Name Type
2-3 BrassnOrgan Brass
2-4 DoomsDayBrs Brass
3-1 Blues B3 Organ
3-2 Progger B3 Organ
3-3 Jazzer B3 Organ
3-4 Voxy Organ
4-1 PnoBsSplit Split
4-2 EpBsSplit Split
4-3 Delay Piano Split
4-4 TrpPad S pli t Split
5-1 EP Pad Piano
5-2 Comp Piano Piano
5-3 1HandSalsaPiano Piano
5-4 Follow You Piano
6-1 DirtSawLd Syn Lead
6-2 XtremeDLead Syn Lead
6-3 Native Lead Syn Lead
6-4 Fugue n Lead Syn Lead
7-1 VoxStrings Pad
7-2
ThickVoxStr Pad
7-3
PreJMP84 Pad
7-4
Euro String Pad
8-1
StingBubBs Bass
8-2
LstNBasSpace Bass
8-3
Dist Drum Drum
8-4
Comp Drum Drum
To Next Page
Loading...
