Roland Versa UV LEF-12 User Manual

ECO-UV4 Ink Switching Method
 To ensure correct and safe usage with a full understanding of this product's performance, please be sure to read through this
manual completely and store it in a safe location.
 Unauthorized copying or transferral, in whole or in part, of this manual is prohibited.
 The contents of this operation manual and the specications of this product are subject to change without notice.
 The operation manual and the product have been prepared and tested as much as possible. If you nd any misprint or error,
please inform us.
 Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may occur through use of this
product,regardless of any failure to perform on the part of this product.
 Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may occur with respect to any article
made using this product.
About this Manual
This manual explains how to switch the ink being used from ECO-UV ink (hereinafter called EUV ink ) or ECO-UV3 ink
(hereinafter called EUV3 ink ) to ECO-UV4 (hereinafter called EUV4 ink)*
To prevent the ink from mixing, perform operations according to the procedures given in this manual.
* Colors with EUV4 ink are dierent than with EUV and EUV3 ink.
* Switching from EUVS ink to EUV4 ink is not possible.

Roland Versa UV LEF-12 Specifications

General

Brand	Roland
Model	Versa UV LEF-12
Category	Printer
Language	English

Summary

Preparation before Operations

Verifying Items to Be Used

Confirms that all necessary cleaning sticks and cleaning liquid are available for the procedure.

Checking Necessary Files

Verifies the presence of essential firmware and VersaWorks updater files for the ink switching process.

Memo VersaWorks Settings

Recommends recording current VersaWorks settings, IP address, and job data before updating.

Switching the Ink

Update Printer Unit Firmware

Instructs on updating the printer unit's firmware to a version that supports EUV4 ink.

Switch Ink Cartridges

Details the process of changing the existing ink cartridges to new EUV4 ink cartridges.

Manual Print Head Cleaning

Guides manual cleaning of the print head area to remove residual ink from previous types.

Update VersaWorks Software

Explains how to update the VersaWorks software to a version compatible with EUV4 ink.

When Operations Are Interrupted

CANCELED FOR MOTOR PROTECTION Message

Provides steps to take when the machine cancels operations due to motor overheating protection.

Interrupted Cleaning Operation

Advises on resuming or re-performing cleaning if the manual cleaning process is stopped prematurely.