Chapter 3 Printing
23
Chapter 3 Printing
3-1 Print Job Setting
Click .
Turn on the [Convert Spot Color] option.
Click .
In [Operation Mode], select the operation
of the printer.
Click [OK] to close the "Queue A Proper-
ties" window.
This is the end of the print job setting. To start printing, go on to page 41 “Starting the Print Operation.”
Only the settings necessary for the use of the metallic silver ink are described in this section. For other settings,
refer to the online help provided for VersaWorks.
* If you select [CMYKLcLm (v)] for [Mode] in the procedure
, only the area of the image where CMYK is
specied in the printing data is to be printed.
To Next Page
Loading...
