Click .
For [Media Type], select names with [MT]
attached such as "Generic Vinyl 1 [MT]."
Make the selection that matches the media to be
used.
Selecting an item attached with [MT] enables you
to choose the print mode that can use the metallic
silver ink.
For [Print Quality], select either [High
Quality (Layered)] or [Standard (Layered)].
Check that [Mt -> CMYKLcLmLk (v)] is
selected for [Mode].
Click .
Turn on the [Convert Spot Color] option.
Click .
In [Operation Mode], select the operation
of the printer.
Click [OK] to close the "Queue A Proper-
ties" window.
This is the end of the print job setting. To start printing, go on to P. 51, "Starting the Print Operation".
* Only the settings necessary for the use of the metallic silver ink are described in this section. For other set-
tings, refer to the online help provided for VersaWorks.
VS-640i_USE2_EN_R1.indb 46 2013/07/23 19:00:29
To Next Page
Loading...
Need help?
General
