Roland XPS-60 - Convenient Functions (UTILITY); Xps-60

53
Operating the menu (MENU)
Convenient functions (UTILITY)
You can back up data on the XPS-60 to a USB ash drive, or restore data from the USB ash drive to the XPS-60.
Use UTILITY to reset the XPS-60 to its factory settings, or to format a USB ash drive.
Backing up data on the XPS-60 to a USB ash
drive (BACKUP)
Here’s how to back up user data to a USB ash drive.
Data included in the backup:
¹ Scene, tone, drum kit, and step sequencer data
¹ Favorites
¹ System settings
NOTE
Never turn o the power or remove the USB ash drives while the
screen indicates “Processing...”.
1. Plug a USB ash drive into the instrument.
* If this is the rst time you’re using the USB ash drive, format it on
the XPS-60 (p. 54).
2. On the UTILITY screen, move the cursor to
“BACKUP” and press the [ENTER] button.
The BACKUP screen appears.
3. Enter the le name.
MEMO
Refer to “Operations used for inputting names” (p. 32) for how
to input a name.
4. Once you’ve entered the lename, press the
[ENTER] button.
A conrmation message appears.
If you decide to cancel, press the [EXIT] button.
5. Move the cursor to “OK” and press the [ENTER]
button.
When the backup is nished, the screen indicates “Completed”.
Returning the data that you backed up on a
USB ash drive to the XPS-60.
Here’s how user data that you backed up on a USB ash drive can be
returned to this instrument. This operation is called “restore”.
NOTE
¹ All user data is overwritten when you execute the restore
operation. If you’ve saved important data on this instrument,
assign it a dierent name and back it up to a USB ash drive
before restoring.
¹ Never turn o the power or remove the USB ash drives while the
screen indicates “Processing...”.
1. Plug a USB ash drive into the instrument.
2. On the UTILITY screen, move the cursor to
“RESTORE” and press the [ENTER] button.
The RESTORE screen appears.
3. Move the cursor to the le you wan to restore, and
press the [ENTER] button.
A conrmation message appears.
If you decide to cancel, press the [EXIT] button.
4. Move the cursor to “OK” and press the [ENTER]
button.
The screen indicates “Completed. Turn o the power.” when the
restore operation is completed.
5. Turn the power of the XPS-60 o and then on again.