Roland XPS-60 - Information

55
Operating the menu (MENU)
3. Press the [ENTER] button.
A conrmation message appears.
If you decide to cancel, press the [EXIT] button.
4. Move the cursor to “OK” and press the [ENTER]
button.
The screen indicates “Completed. Turn o the power.” when the
factory reset is completed.
5. Turn the power of the XPS-60 o and then on again.
INFORMATION
Displays the version of the instrument’s system program.
* See the Roland website for information on updating the system
program.
https://www.roland.com/support/
Input the model name Ó refer to “Updates & Drivers”