Roland XPS-60 - Page 6

6
Panel descriptions
[FAVORITE] button
Turns the favorite function on/o (p. 20).
[BANK] (NUMERIC) button
When this button is on (lit), you can use the [1]–[16] buttons to
select a favorite bank.
Press this button while holding down the [SHIFT] button to select
numeric mode.
In numeric mode, you can use the [1]–[10] buttons to select a
tone.
[A.PIANO/E.PIANO]–[USER] (category) buttons
([1]–[16] buttons)
Selects a tone (including scenes, tones and drum kits) category
(type) (p. 14). Turn the value dial to select a dierent tone in the
same category.
[DEC] [INC] buttons
Changes a value. If you press one of these buttons while holding
down the other, the value changes more rapidly. If you press one
of these buttons while holding down the [SHIFT] button, the value
changes more greatly.
[Ç] [É] [Í] [Ë] buttons
Move the cursor position up/down/left/right. Hold down the
buttons to move the cursor continuously. If you hold down the
button for one direction and then press the other button, the
cursor moves more quickly.
[SHIFT] button
Use this button together with other buttons to switch between
functions.
[EXIT] button
Exits the current screen or cancels an operation.
[ENTER] button
Used for conrming a value or executing an operation.
5 PHRASE PAD
[SEQUENCER] button
Press this to use the step sequencer (p. 34).
[RHYTHM] button
Press this to use the rhythm patterns (p. 40).
[AUDIO] button
Press this to play back audio les that are stored on a USB ash
drive (p. 41).
[MUTE] button
Sets whether the applicable part plays or not when you play the
keyboard (p. 24).
When you’re using the step sequencer, this mutes the specied
track (p. 34).
Pads [1]–[8]
These play back the phrases (rhythm patterns/audio les)
assigned to the pads. When the [SEQUENCER] button is on (lit),
these pads select the tracks.
[ò] button
Plays/stops the step sequencer (p. 34).
[ó] (STEP) button
Press this to record to the step sequencer (p. 35).
If you press this button while holding down the [SHIFT] button,
the instrument switches to STEP REC/TR-REC mode (p. 36,
p. 37).
[ERASE] button
Erases some or all of a track you’ve recorded with the step
sequencer (p. 37).
[TEMPO] (TAP) button
Press this to show the TEMPO screen (p. 40).
You can set the tempo by repeatedly pressing the button at the
desired interval (tap tempo).
6
Pitch bend/modulation lever
This lets you control the pitch or apply vibrato.