Roland XV-88 - Page 228

228
Quick Reference of Procedures
Controlling the XV-88 from an External MIDI Device
Setting the MIDI Receive
Channel for
Performance Mode
(for each Part)
Channel parameter (PERFORM/MIDI/MIDI)
Turning On/Off the MIDI
Receive Switch in
Performance Mode
(for each Part)
Rx Sw parameter (PERFORM/MIDI/MIDI)
Setting the Receive
Channel on which
Performances will be
Selected
Control Channel parameter (SYSTEM/MIDI/PERFORM
MIDI)
Turning On/Off the
Receive Switch of the
MIDI Messages in
Performance Mode
(for each Part)
RxSWITCH page (PERFORM/MIDI)
Confirming the Receive
Status of MIDI Messages
in Performance Mode
(for each Part)
INFO page (PERFORM/INFO)
Setting the MIDI Receive
Channel for Patch/
Rhythm Set Mode
Rx Ch parameter (SYSTEM/MIDI/PATCH MIDI)
Turning On/Off the
Receive Switch of
Program Change
Message
Program Change parameter (SYSTEM/MIDI/RECEIVE MIDI)
Turning On/Off the
Receive Switch of Bank
Select Messages
Bank Select parameter (SYSTEM/MIDI/RECEIVE MIDI)
Turning On/Off the
Receive Switch of the
MIDI Messages in Patch/
Rhythm Set Mode
(for each Tone)
CTRL Rx MIDI page (PATCH/CONTROL)