•
6.10 DRIVE MODE SETTING.......................................................................................................................................................................
•
6.11 PEDAL ASSIST SENSITIVITY SETTING..........................................................................................................................................
•
6.12 PEDAL ASSIST STRENGTH SETTING..........................................................................................................................................
•
6.13 NUMBER OF PEDAL ASSIST SENSOR MAGNETS SETTING.................................................................................................
•
6.14 CONTROLLER CURRENT LIMIT SETTING
..................................................................................................................................
•
6.15 BATTERY UNDER VOLTAGE VALUE SETTING.........................................................................................................................
•
6.16 TRIP ODOMETER RESET OPERATION
........................................................................................................................................
•
6.17 CRUISE CONTROL SETTING..........................................................................................................................................................
•
6.18 SPEED RETIO SETTING...................................................................................................................................................................
◆ 7. SHORTCUT OPERATION................................................................................................................................................................................
•
7.1 SHORTCUT OPERATION......................................................................................................................................................................
•
7.2 TRIP ODOMETER RESET OPERATION
.............................................................................................................................................
◆ 8. WIRE CONNECTION DIAGRAM.....................................................................................................................................................................
•
8.1 STANDARD WIRE CONNECTION SEQUENCE................................................................................................................................
◆
9. PRECAUTIONS
................................................................................................................................................................................................
SCHEDULE 1: ERROR CODE DEFINITION
...................................................................................................................................................
◆
1.Product Name and Model Number
◆
2. Specification
•
36V/48V/52V power supply
•
Display rated current 15mA
•
Display maximum current 30mA
•
Shutdown leakage current <1uA
•
Supplied current to the controller 50mA
•
Operating temperature -20～60℃
•
Storage temperature -30 to 70°C
◆ 3. Appearance and Size
To Next Page
Loading...
