EN-15
PREPARING THE CAMERA
Installing the Batteries
You can use 2 AA size batteries (alkaline or Ni-MH rechargeable) to power the
camera. Make sure that the power of the digital camera is off before inserting or
removing the batteries.
1. Make sure the camera is turned off.
2. Open the battery cover.
3. Insert the batteries in the correct
orientation as shown in the illustration.
4. Close the battery cover.
To remove the batteries, turn the
camera off before removing batteries
and hold the camera with the battery
cover facing upward, then open the
battery cover.
Be careful not to drop the batteries when opening or closing the battery cover.
Due to the characteristics of AA alkaline battery, camera performance may deteriorate. AA
alkaline battery is not recommended except in emergencies and checking the camera's
functionality.
To Next Page
Loading...
Need help?
General
