EN-19
Setting the Date and Time
Follow the steps below to set the date display style, current date and time.
1. Rotate the mode dial to and turn your
camera on by pressing the power switch.
2. [Set-up1] is displayed.
3. Use the four-way controller (T) to select
[Date & Time], then press the button.
4. Press the four-way controller (WX) to
select date style, Day, Month, Year and
Time fields.
To increase a value, press the four-way
controller (S).
To decrease a value, press the
four-way controller (T).
To select the time display in 12-hour or
24-hour format, press the four-way
controller.
5. Press the button after all fields are set.
The date illustration shown is for the purpose of explanation and may differ from the actual
setting of your camera.
Set-up1
To Next Page
Loading...
Need help?
General
