EN-16
Inserting and Removing an SD Memory Card
(Optional Accessory)
The digital camera comes with 16MB of internal memory, allowing you to store
captured still images or video clips in the digital camera. Moreover, you can also
expand the memory capacity by using an optional SD (Secure Digital) memory card so
that you can store more files.
1. Make sure your camera is turned off before
inserting or removing a memory card.
2. Open the SD memory card cover.
3. Insert an SD memory card in the correct
orientation as shown in the illustration.
4. Close the battery/SD memory card cover.
To remove the SD memory card, make
sure the camera is turned off. Press
lightly on the edge of the memory card
and it will eject.
Be sure to format an SD memory card with this
digital camera before using it. Refer to section in
the manual titled “Formatting an SD Memory
Card or Internal Memory” for further details.
To prevent valuable data from being accidentally
erased from an SD card, you can slide the write
protect tab (on the side of the SD memory card) to
“LOCK”.
To save, edit, or erase data on an SD memory
card, you must unlock the card.
To Next Page
Loading...
Need help?
General
