EN-45
Connect the digital camera to your computer
1. Rotate the mode dial to and turn your camera on by pressing the power switch.
2. Press the four-way controller (X) to select the [Set-up2] menu, then use the
four-way controller (T) to select [USB Mode].
3. Press the button.
4. Use the four-way controller (T) to select [PC], then press the button.
5. Turn off your camera.
6. Connect your camera and the computer via
the supplied USB cable.
7. Turn your camera on by pressing the
power switch.
8. There will be a new “Removable Disk” icon
detected in “My Computer”, which contains
your recorded images or movie clips. (For
Mac users, double-click [untitled] or
[unlabeled] disk drive icon on our desktop.)
PC/Video terminal
To Next Page
Loading...
Need help?
General
