Rollei RCP-6324 User Manual

EN-57
Setup Menu
This feature allows you to set up the default settings by preference for using your
camera.
1. Rotate the mode dial to mode and turn your camera on.
2. Press the four-way controller (WX) to select the [Set-up1] / [Set-up2] / [Set-up3]
menu.
3. Use the four-way controller (ST) to select the desired option item, then press the
button.
4. To exit the setup menu, rotate the mode dial to another mode.
 Set-up1 settings
Item Functional Description
Format Erases all images and reformats the SD memory card loaded in your
camera. Protected images are also erased. SD memory card cannot be
formatted if it is write-protected.
Refer to the section in this manual titled “Formatting an SD Memory
Card or Internal Memory” for further details.
Beeper This sets whether or not to mute the start-up sound, and the camera
sound each time you press a camera button.
Louder / Soft / Off
Date &
Time
This sets the date and the time.
Refer to the section in this manual titled “Setting the Date and Time”
for further details.
d/m/y
m/d/y
y/m/d
Language Sets the language that is displayed on the LCD monitor screen.
Refer to the section in this manual titled “Choosing the Screen
Language” for further details.
Set-up1Set-up1Set-up1 Set-up2Set-up2 Set-up3Set-up3Set-up2 Set-up3
LanguLanguage
Da
te & Timte & Time
BeeperBeeper
Format
Language
Format
Date & Time
Beeper
Select :
Select :Select :
En
EnglislishEnglish
m/d/y
m/d/y
LouderLouder
m/d/y
Louder
Select :Select :Select :
Set-up1Set-up1Set-up1 Set-up2Set-up2Set-up2 Set-up3Set-up3Set-up3
Auto Shut Duto Shut Down
L
CD BrightnesCD Brightness
TVTV
USB ModeUSB ModeUSB Mode
3 Min.
3 Min.
NTSCNTSC
PCPC
Auto Shut Down
LCD Brightness
TV
3 Min.
NTSC
PC
Select :Select :Select :
Set-up1Set-up1Set-up1 Set-up2Set-up2 Set-up3Set-up3Set-up3Set-up2
Versiosion
Set Set To Deo Defaulault
R
eset Numbeeset NumberReset Number
Version
Set To Default
11

Rollei RCP-6324 Specifications

General

Brand	Rollei
Model	RCP-6324
Category	Digital Camera
Language	English