EN-52
In the , , , , or Mode.
Mode1 settings
Mode2 settings
Item Functional Description
Image Size Refer to the section in this manual titled “Setting Image Resolution
and Quality” for further details.
Quality Refer to the section in this manual titled “Setting Image Resolution
and Quality” for further details.
W.Balance Sets the white balance when shooting under a variety of lighting
conditions and permits photographs to be taken that approach the
conditions that are seen by the human eye.
Auto
Daylight
Cloudy
Tungsten
Fluorescent
ISO Sets the sensitivity for taking pictures. When the sensitivity is raised
(and the ISO figure is increased), photography will become possible
even in dark locations, but the more pixelated (grainier) the image will
appear.
Auto / 64 / 100 / 200 / 400
Item Functional Description
Metering You can select the metering mode that sets which part of the subject to
measure to determine the exposure.
Center-weighted: Averages the light metered from the entire
frame, but gives greater weight to the subject matter in the center.
Spot: The exposure is determined by the small area in the center
of the screen only.
Digital
Zoom
This sets whether or not to use digital zoom at the time of shooting.
Refer to the section in this manual titled “Using the Zoom Function” for
further details.
Quick View Set to display a photographed image on LCD monitor screen
immediately after you have taken the shot.
To Next Page
Loading...
Need help?
General
