13
NOTE: You may need someone's help in this step.
Fasten the SHELVES (B2, C2, and D2) and BACKS (E2) to the LEGS (G and I). Tighten nine HIDDEN CAMS.
NOTE: Be sure the METAL PINS (1R) in the ends of the BACKS (E2) insert into the holes in the LEGS (G and I).
step 8.
417087
Surface without holes
Surface without holes
B2
C2
D2
E2
E2
E2
G
I
Serious or fatal crushing injuries can occur
from furniture tip-over. To help prevent
tip-over:
• Install tip-over restraint provided.
• Place heaviest items on the lowest surfaces as
far back from the front edge as possible.
• Unless specifi cally designed to accommodate,
do not set TVs or other heavy objects on top of
this item.
• Never allow children to hang on drawers, doors
or shelves.
Use of tip-over restraints may only reduce, but
not eliminate, the risk of tip-over.
This is a permanent label. Do not attempt to remove!
WARNING
To Next Page
Loading...
