Accessories and modifications
Version 1 RES-415 Page 9
The RESISTRON
®
temperature controller RES-415 is designed for installation in a front panel cutout. The com-
pact design and the plug-in connections make this controller easy to install.
5 Accessories and modifications
A wide range of compatible accessories and peripheral devices are available for the RESISTRON
®
temperature
controller RES-415. They allow it to be optimally adapted to your specific heatsealing application and to your
plant's design and operating philosophy.
5.1 Accessories
The products described below are only a few of the wide range of accessories available for RESISTRON
®
tem-
perature controllers ("Accessories" leaflet).
Line filter LF-xx480
Essential in order to ensure CE conformity.
Optimized for the RESISTRON
®
temperature controller.
Impulse transformer ITR-x
Designed according to EN 61558 with a one-section bobbin.
Optimized for impulse operation with RESISTRON temperature controllers.
Specified according to the heatsealing application
( ROPEX Application Report).
Communication interface CI-USB-1
Interface for connecting a RESISTRON temperature controller with diagnostic inter-
face (DIAG) to the PC (USB port). Associated PC visualization software for dis-
playing setting and configuration data, and for recording SET and ACTUAL temper-
atures in real time.
Monitoringcurrent transformer
For detecting frame short-circuits on the heatsealing band.
Used as an alternative to the standard PEX-W2/-W3 current transformer.
Transparent front cover TFA-1
For increasing the degree of protection on the front of the controller to IP65.
Also facilitates applications in the food technology sector (GMP).
To Next Page
Loading...
Need help?
General
