RosRoca Dennis Eagle Olympus - Page 28

3
3‑4
DAILY CHECKS
OL1D-SM-GB02D
16. Switch on the warning beacons.
• Check that the warning beacons and their
associated warning lamps operate correctly
when switched on and extinguish when
switched off.
• If separate cab beacon switch is fitted check
that it over‑rides function on cab control panel.
2748-DS002-OL1-D-GB-G2
01.06.2013
Hyd Oil Temp
09:00:00
32
o
C
0 No errors
0 No errors
0 No errors
3121-OL1-D-GB-G2
17. Make sure that the parking brake is applied and
Neutral ‘N’ is selected.
18. Start the engine, check the warning panels and
instrumentation for any indications of system
malfunctions.
• The ‘Low air pressure’ warning buzzers should
not be sounding.
19. Turn the ‘Body main’ switch on.
• The screen should display the ‘Body system
run’ mode and ‘System on’ pictogram.
2748-DS003-OL1-D-GB-G2
Hyd Oil Temp 32
o
C
01.06.2013 09:00:00
0 No errors
0 No errors
0 No errors
• If any warning pictograms are displayed on
the screen, report to supervision immediately
and do not proceed any further with the daily
inspection.
13. Switch the ignition on only, do not start the engine.
• The control screen should initialise and then
display the ‘Body system off’ mode.
I
0
II
III
2748-DS002-OL1-D-GB-G2
01.06.2013
Hyd Oil Temp
09:00:00
32
o
C
0 No errors
0 No errors
0 No errors
2748-DS029-OL1-D-GB-G2
14. Switch on all the vehicle lamps, including fog lamps
(if fitted).
• Check that the lamps and their associated
warning lamps illuminate when switched on
and extinguish when switched off.
15. Operate the footbrake.
• Check that all the brake lamps illuminate when
the pedal is pressed and extinguish when the
pedal is released.