3
3‑8
DAILY CHECKS
OL1D-SM-GB02D
34. Press and hold the ‘Tailgate raise’ switch until the
tailgate is fully raised and then release the switch.
0 No errors
0 No errors
0 No errors
Hyd Oil Temp
0 No errors
0 No errors
32
o
C
01.06.201309:00:00
Hyd_Oil_Pressure 210 Bar
2
• Tailgate should resume rotating upwards about
the hinge pins until fully raised when it should
stop without noticeable judder.
• ‘Vehicle reversing’ alarm should sound while
the ‘Tailgate raise’ switch is being pressed and
the tailgate is rising.
• When the tailgate is raised, the ‘Tailgate fully
raised’ pictogram should display on the control
panel screen.
32. Press and hold the ‘Tailgate raise’ switch.
0 No errors
0 No errors
0 No errors
Hyd Oil Temp
0 No errors
0 No errors
32
o
C
01.06.201309:00:00
Hyd_Oil_Pressure 210 Bar
2
• Tailgate should rotate smoothly upwards about
the hinge pins.
• ‘Vehicle reversing’ alarm should sound.
33. While tailgate is rising, release the switch before it
reaches its fully raised position.
• Tailgate should stop rising immediately the
switch is released.
• Tailgate should not lower.
• ‘Tailgate out‑of‑locks’ pictogram should display
on the control panel screen.
2748-DS049-OL1-D-GB-G2
0 No errors
0 No errors
0 No errors
Hyd Oil Temp
0 No errors
0 No errors
32
o
C
01.06.2013 09:00:00
Hyd_Oil_Pressure 210 Bar
2
• ‘Vehicle reversing’ alarm should silence.