3
3‑14
DAILY CHECKS
OL1D-SM-GB02D
56. Press and hold the ‘Start pack cycle’ push‑button
again.
• Carriage plate and packer plate should
continue to move fully downwards from
stopped position and then stop when carriage
plate fully lowered.
57. Press and hold the ‘Start pack cycle’ push‑button
again.
• The packer plate should close.
Release the push‑button after the packer plate has
started to close.
• Packer plate should automatically close and
then the carriage plate and packer plate
should move upwards until the compaction
mechanism is fully packed when it should stop.
58. Press the ‘Signal’ push‑button.
• ‘Tailgate signal’ buzzer in the cab should
sound immediately the push‑button is pressed
and silence immediately the push‑button is
released.
2774-OL1-D-GB-G1
• The ‘Signal’ warning pictogram should display
on the control panel screen while the button is
pressed.
Open System vehicles (no waste container lifting
device fitted).
Vehicles fitted with an open waste container lifting
device and guide plate in lowered position.
54. Press and release the ‘Start pack cycle’ push‑
button.
• Packer plate should open and then stop.
55. Press and hold the ‘Start pack cycle’ push‑button.
• Carriage plate and packer plate should move
downwards.
Release the push‑button while the carriage plate
and packer plate are moving downwards.
• Carriage plate and packer plate should stop
immediately.
To Next Page
Loading...