3
3‑16
DAILY CHECKS
OL1D-SM-GB02D
63. Press the ‘Start pack cycle’ push‑button.
• Compaction mechanism should not operate.
64. Turn the ‘Body main’ switch off and then on again.
0
0
65. Press the ‘Start pack cycle’ push‑button.
• Check that the compaction mechanism restarts
and operates to specification.
66. Turn the ‘Body main’ switch to Off position.
Remove and retain the key.
67. Open the body access door.
• Packer plate should open and carriage plate
move upwards simultaneously until it is fully
open and fully unpacked.
• The ‘Rescue’ warning pictogram should display
on the control panel screen.
61. Turn the ‘Body main’ switch off and then on again.
0
0
62. Pull the ‘Emergency stop’ push‑button outwards.
• ‘Emergency stop’ warning buzzer in the cab
should silence.