3
3‑25
DAILY CHECKS
OL1D-SM-GB02D
2840-OL1-D-GB-G2
It is an offence
for any person to
ride on the rear of
a moving vehicle
Stand clear
when blade is
in motion
Do not reach into
the hopper when
blade is in motion
Stand clear
when blade is
in motion
Do not reach into
the hopper when
blade is in motion
386+726723386+726723
It is an offence
for any person to
ride on the rear of
a moving vehicle
855375B
855377
855375B
855373B
855373B
855377
46789B
Note: Label not fitted when footboards are fitted Note: Label not fitted when footboards are fitted
Fig. 3-6 Warning labels; rear of collection bodywork
PACK ON THE MOVE
CAUTION
Ensure cab control panel has the operating system
selected ‘OFF’, when undertaking normal road use.
Do not allow the packing mechanism to labour at
maximum stalling pressure for prolonged periods of time
eg. Body full.
The packing mechanism can be stopped from within the
cab by selecting ‘OFF’ on the control panel.
Normal packing cycle engine speed is automatic and
preset for maximum efficiency and minimum noise.
Packing mechanism is preset and controlled hydraulically.
Do not over speed the engine in this instance as it simply
reduces efficiency and increases noise.
857642
2851-OL1-D-GB-G1
Fig. 3-7 Warning labels; cab
To Next Page
Loading...