NK-VRC User Guide (v05) Physical Installation • 17
Connecting the NK-VRC to a Power Supply
The NK-VRC is powered using the power supply provided. This power supply connects directly to the AC mains
supply.
To connect the NK-VRC to a power supply
1. Connect the power supply provided to the POWER connector on the rear panel of the NK-VRC.
2. Connect the cable from the power supply to a suitable AC mains supply.
Checking the Software Version of the NK-VRC
The NK-VRC must operate with other devices that have v2.00 software or later. Software may be updated using
DashBoard. To learn what is the latest software version, contact Ross Video Technical Support.
To launch DashBoard
1. Ensure that you are running DashBoard software version 8.0 or higher.
2. Launch DashBoard by double-clicking its icon on your computer desktop.
To check the software version of a device using DashBoard
1. Connect to the NK-IPS. Refer to the NK-IPS User Guide.
2. In the Basic Tree View section, double-click the device for which you want to check the software version.
3. In the Device Details section of the interface, view the Version field for the current software version.
Warning — Ensure that the AC mains supply complies with the PSU specification before making the
connection.
Warning — An earthed neutral mains supply and residual current device is recommended for safe
operation.
To Next Page
Loading...
