Need help?Do you have a question about the Ross NK-16 and is the answer not in the manual?
General| Brand | Ross |
|---|---|
| Model | NK-16 |
| Category | Network Router |
| Language | English |
Explains the meaning of various safety symbols used in the manual.
Provides critical safety instructions for operating and maintaining the equipment.
Details the specifications and types of power cords required for safe operation.
Covers compliance with FCC Part 15 and Canadian ICES-003 regulations.
Outlines the terms and conditions of the product's warranty and repair procedures.
Describes the option to purchase an extended warranty plan.
States the purpose and intended audience of the user guide.
Highlights the various matrix sizes and signal types offered by the NK Series routers.
Details installation and specifications for NK-16, NK-32, and NK-34 routers.
Details formats and specifications for NK-64 and NK-72 routers.
Covers various control panels like RCP-NK1, RCP-NKM, RCP-NKQ.
Explains the NK Virtual Control Panel and its accessibility via NK-IPS.
Describes the NK Virtual Routing Core and its use with the Phoenix Control Surface.
Details the NK-IPS (Internet Protocol Server) used for configuration and control.
Explains the NK Hub software component for connecting multiple NK-IPS devices.
Describes the NK-3RD Third-Party Interface for controlling NK routers via SW-P-08 protocol.
Covers the NK-SCP Serial Control Port models (NK-SCP/A and NK-SCP/K2).
Explains the NK-GPI universal GPI interface for NK family routers.
Details the T-Bus multi-drop control system for connecting NK components.
Covers standard and optional power supply units for NK Series routers.
Guides on unpacking, pre-installation, and connecting NK components.
Explains the default settings for NK routers and control panels out-of-the-box.
Details how to configure routers, including options via NK-IPS and Phoenix.
Guides on configuring the RCP-NK1 panel, including its capabilities and operation.
Details how to assign levels to breakaways and configure key definitions for RCP-NK1.
Explains how to enable or disable reciprocal switching for machine control.
Details configuration requirements for the NK-SCP/A via NK-IPS.
Outlines the configuration process for NK-SCP/K2 when connected to Geneos CPU.
Explains how to configure GPI inputs and outputs via NK-IPS.
Provides an overview of NK Series operation, including start-up processes.
Details the operational procedures for a single RCP-NK1 control panel.
Covers operational considerations when linking multiple RCP-NK1 panels.
Details the configuration and operation of the NK-A64's analog audio control layer.
Provides an overview of controlling NK routing systems using the NK-SCP/A via ASCII protocol.
Explains the importance and function of video referencing for NK routers.
Details the DB-25 connector pinouts for analog and digital audio routers.
Details the DB-9 pinouts for machine control connections on NK-M16 and NK-M32 routers.
Details the RJ-45 connector port for the T-Bus control system.
Shows the DB-9 connector port pinouts for the NK-SCP/A.
Shows the DB-9 connector port pinouts for the NK-SCP/K2.
Explains selectable input/output level controls for NK Series Analog Audio Routers.
Shows gain control diagrams and I/O connections for NK-A16 and NK-A32 router inputs.
Details I/O connections and solder links for NK-A64 router inputs.
Explains how to set selectable output rise times for NK-MD72 router outputs using DIP switches.
To Next Page
