NK Series User Guide (1.0) Configuration • 4–27
Submit and Upgrade Fields
Submit Settings
The Submit Settings button will upload the settings to the device.
If users wish to cancel or ignore the settings they have made, click the Online tab to return to the Online Devices
page, or click the Refresh button of your browser to revert to the original settings displayed.
Upgrade Firmware
The Upgrade Firmware button is used to upload to the device the latest firmware, contained in a binary file.
Upgrading firmware allows new features, enhancements and improvements of the NK-SCP/K2 to be installed.
Configuring the Router in Geneos
When each router has been configured from the NK-IPS, the levels, first input and first output must be entered into
the Physical Map and Virtual Labels pages in Geneos exactly as they were configured in the router’s Device
Properties page via the NK-IPS. Configuration of the Virtual Labels page requires that mnemonics be entered from
the Mnemonics page.
For more information on configuring levels, inputs and outputs as well as entering mnemonics, refer to the Geneos
User Guide.
Configuring the GPI
Configuration Options
The NK-GPI Device Properties page, accessible through the NK-IPS, allows users to configure the GPI input and
output range, as well as the input and output modes.
For details on how to configure the GPI via Phoenix, please refer to the Phoenix Online Help Guide.
To Next Page
Loading...
