NK Series User Guide (1.0) Installation • 3–15
NK-VCP
Figure 3.25 NK-VCP
The NK Virtual Control Panel (NK-VCP), accessible only through the NK-IPS, enables users to remotely control an
entire NK system. If required, it is also possible to control multiple systems, alternating between each as needed.
The VCP can be purchased as an addition to an existing NK system or can be purchased as part of a new system.
The NK-VCP is built with Java technology, enabling flexibility and cross-platform control. Users are advised to
have installed the latest version of the Java Runtime Environment (JRE) before using the VCP. For further
information on the VCP and the Java Runtime Environment, please refer to the NK-IPS Internet Protocol Server
User Guide.
As the VCP works in conjunction with the NK-IPS, VCP control can be password protected to allow only
authorised users to perform router functions. One VCP license is provided with the purchase of an NK-IPS. If
further licenses are required, an upgrade file can be purchased and installed.
Please note that as VCP licenses and usage are inherently linked to and modified by the NK-IPS, all configuration
and functionality details are outlined in the NK-IPS Internet Protocol Server User Guide.
To Next Page
