Ross NK Series - Smartpaste

22 • Setting Up the NK-VRC NK-VRC User Guide (v05)
4. Select the device pages to send to the device. Use the information in Table 4.2 as a guide.
5. From the Select Devices list, select the device to which the current configuration is to be sent.
6. Click
Send.
DashBoard automatically reloads the interface.
For More Information on...
• sending a configuration using SmartPaste, refer to “SmartPaste” on page 22.
SmartPaste
SmartPaste offers a convenient way to apply a configuration file or a device configuration to other NK-VRC
devices. Selecting the SmartPaste check box of a device will send the configuration to that device.
 SmartPaste can only be used to apply a configuration to another of the same device.
To SmartPaste a configuration
1. Open a interface or configuration file.
2. Click
Send Configuration.
The Send Config to NK Device window opens.
3. Select the device pages to send to the device (see step 4 in “Sending the Configuration to a Device” on
page 21 for the device page descriptions).
4. In the Select Devices list, select the SmartPaste check box of the device(s) to which the configuration will be
sent.
Selecting SmartPaste will send the Device Details as well as the selected device pages.
5. Click
Send.
DashBoard automatically updates the interface of the device(s) with the configuration.
 SmartPaste can also be used by dragging a configuration file from the File Navigator to the Device Details area
of a device, however, the configuration is pasted but not actually sent to the device.
This method pastes only device pages and not the Device Details and can only be dragged and dropped into one
device at a time.
Table 4.2 Page descriptions
Page Description
Select Page This check box is automatically selected when the configuration is changed
on any of the device pages. This does not include Device Details.
Home The information contained in the Device Details frame.
Dsts The destination information contained in the Physical Map tab.
Srcs The source information contained in the Physical Map tab.
Resources The resource information contained in the Resources tab.
Parks The park source information contained in the Parks tab.
Res Rules The resource rules information contained in the Res Rules tab.
Priorities The priority information contained in the Priorities tab.
Log The log tab captures T-Bus events for diagnostics.
Compatibility The Carbonite eXtreme compatibility settings are contained in the
Compatibility tab.