ULTRIX-MODX-IO User Guide (v1.0) Getting Started • 11
Getting Started
The ULTRIX-MODX-IO enables broad signal format support on the Ultrix router using high-density
hot-swappable I/O modules. Each ULTRIX-MODX-IO blade hosts four IO modules available with
different video interfaces including support for compressed streams and embedded audio. Mix and
match modules within a single blade to get the density and formats you need for your production.
Features
Each ULTRIX-MODX-IO blade supports:
• Up to four Plug-and-Play I/O modules
• Maximum 16 UHD IN + 16 UHD OUT
• GigE interface to frame ethernet network
• Color space of YUV 4:2:2 10-bit
• 384 channels of embedded audio
• Up to 3 x Ultriscape MV Licenses
• Two AUX ports (AUX A, and AUX B)
• Up to 3 UHD Frame Syncs inputs
• 18 UHD Clean/Quiet Switch outputs
• An UltriMix matrix of 128 x 64
Before You Begin
You may also need to install the following license keys:
• UltriSpeed — if the blade and/or its modules include an SFP-HDB-IN-12G, SFP-FIBER-12G, and/or
SFP-HDB-OUT-12G.
• Ultriscape — for each port that will be used to provide an Ultriscape head output.
• UltriSRC — for each port configured for an asynchronous MADI input.
• Ultrisync-UHD —a per input frame sync license to support UHD video rates. Each slot supports up
to 3 Ultrisync-UHD ports. Requires software version 4.2.0 or higher and is applicable only to the
ULTRIX-HDBNC-IO, ULTRIX-SFP-IO, and ULTRIX-MODX-IO blades.
• UltriSync— a per input 3G frame sync license enabling alignment to router sync.
• Ultrimix-MXR — enables the configuration and use of audio mixer soft panels.
Refer to the user guide for your Ultrix router for more information on license keys.
To Next Page
Loading...
Need help?
General
